All Work unit v. 2.03 return with an error message

eOn code for long time scale dynamics

Moderator: moderators

Post Reply
MDodier
Posts: 1
Joined: Sat Dec 04, 2010 9:40 am

All Work unit v. 2.03 return with an error message

Post by MDodier »

My computer is working 24/7 on this project.

Since 5 hours all the worikunit receive on my I7 860 computer are return with Calculation Error messsage. Notifié: Erreur de calcul (-177,)

eon2 2.03 eOn Client 1750793306_8650121_0 00:03:38 (00:03:27) 2010-12-30 12:59:53 2010-12-30 13:07:20 Notifié: Erreur de calcul (-177,)


Do you have the same problem?

What to do?

MDodier
mickydl*
Posts: 4
Joined: Fri Dec 03, 2010 7:20 pm

Re: All Work unit v. 2.03 return with an error message

Post by mickydl* »

Yes, you are not alone. See this thread as well.
Michael
Conan
Posts: 18
Joined: Wed Sep 08, 2010 1:03 pm

Re: All Work unit v. 2.03 return with an error message

Post by Conan »

Same here on both Linux and Windows.
Windows jobs run a lot longer and give virtually no credit at all.
Linux run too long and end in error with "exceeded maximum run time" or something like that.

No New Work till fixed.
kaptainblazzed
Posts: 4
Joined: Thu Dec 30, 2010 9:49 pm

Re: All Work unit v. 2.03 return with an error message

Post by kaptainblazzed »

Same here, All WU's fail on both of my win 7 x64 machines.

Off to a different project till this gets worked out. :(
kaptainblazzed
Posts: 4
Joined: Thu Dec 30, 2010 9:49 pm

Re: All Work unit v. 2.03 return with an error message

Post by kaptainblazzed »

Same as before, no progress made.

all WU's Fail on both my machines. :(
Post Reply